today we’re having a look at a motorized sit-stand desk…Flexispot Ec5S… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Inspect out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and likewise a little reluctant (since we all know how much of a challenge assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as close to that as I could on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any type of cable television management products whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a more affordable replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their site also which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous alternatives and devices I might however I believe I’m happier that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Ec5S
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I have not personally used really desk products so I can’t speak on it but their credibility is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged but from a customer viewpoint you ‘d most likely be truly thrilled to get this in