today we’re having a look at a motorized sit-stand desk…Flexispot Ec8… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it likewise looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be tough) and likewise a little reluctant (because we all understand how much of a challenge assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I like the sleek look of this desk. I’m positive any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as lot of times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near to that as I might on uplifts site with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for go through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had bought this I ‘d have been on the phone with customer support right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed also my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site also which likewise feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various options and accessories I could however I believe I’m better that they just sent out a basic desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Ec8
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity but I would spend the money it’s gon na take to get into a higher end maker like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it however their reputation is very good huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d most likely be truly thrilled to get this in