today we’re having a look at a motorized sit-stand desk…Flexispot Ed2/Ek2… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Examine out the video below of it operating while there’s a person lying down on it if you do not think me.
The electric raise/lower feature is not just easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The practical cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this meant it was going to be tough) and likewise a little hesitant (due to the fact that we all understand just how much of a difficulty putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the streamlined look of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as many times as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had acquired this I ‘d have been on the phone with customer care immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their site also which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous choices and devices I might however I believe I’m happier that they just sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of extras is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Ed2/Ek2
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a consumer standpoint you ‘d probably be truly delighted to get this in