today we’re taking a look at a motorized sit-stand desk…Flexispot Ed2B H√∂Henverstellbarer Schreibtisch Elektrisch… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. If you do not think me, take a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not only easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and also a little reluctant (due to the fact that we all know just how much of a challenge putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I love the smooth look of this desk. I’m positive any of the many varied finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as many times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged too my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering various options and devices I might but I believe I’m happier that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Ed2B H√∂Henverstellbarer Schreibtisch Elektrisch
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d probably be really thrilled to get this in