today we’re having a look at a motorized sit-stand desk…Flexispot Ed2B Idealo… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this suggested it was going to be tough) and likewise a little reluctant (since we all understand just how much of an obstacle putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually purchased this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best seems like a less expensive replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering numerous choices and accessories I might however I believe I’m happier that they just sent out a basic desk since as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Ed2B Idealo
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would invest the additional money it’s gon na take to enter a greater end producer like uplift desk or very desk and I haven’t personally utilized really desk products so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be really excited to get this in