today we’re having a look at a motorized sit-stand desk…Flexispot Ed2W… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you don’t believe me, take a look at the video below of it operating while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be sturdy) and likewise a little hesitant (due to the fact that all of us understand how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as often times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually purchased this I ‘d have been on the phone with client service immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering different options and accessories I might however I think I’m better that they just sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the move when the core product isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Ed2W
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would invest the money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d probably be really excited to get this in