today we’re having a look at a motorized sit-stand desk…Flexispot Eg1 Assembly… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and also a little reluctant (because we all understand how much of a challenge assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had bought this I ‘d have been on the phone with customer support immediately they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my plan for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site also which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous options and devices I could but I think I’m happier that they just sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Eg1 Assembly
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na require to get into a greater end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their reputation is great big thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a customer perspective you ‘d most likely be actually delighted to get this in