today we’re taking a look at a motorized sit-stand desk…Flexispot Eg1/Ef1/Ez1… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be durable) and likewise a little hesitant (because we all know just how much of a difficulty assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the sleek look of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had purchased this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my plan for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best seems like a cheaper replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering various alternatives and devices I might however I believe I’m happier that they just sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of extras is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Eg1/Ef1/Ez1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance however I would invest the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here harmed however from a client viewpoint you ‘d probably be truly excited to get this in