today we’re having a look at a motorized sit-stand desk…Flexispot Eg1-l… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you don’t think me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this indicated it was going to be strong) and likewise a little reluctant (due to the fact that we all understand how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I might on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had actually purchased this I ‘d have been on the phone with customer support immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best seems like a more affordable replica of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and devices I might however I believe I’m happier that they just sent a basic desk since as a standard desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a lot of additionals is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Eg1-l
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the extra money it’s gon na take to get into a higher end producer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it but their reputation is great huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d most likely be truly excited to get this in