today we’re taking a look at a motorized sit-stand desk…Flexispot Eg1-light… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not just easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise practical if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this implied it was going to be sturdy) and likewise a little hesitant (since all of us understand how much of a difficulty assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as often times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near that as I might on uplifts website with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough male if I had actually purchased this I ‘d have been on the phone with client service right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed as well my plan for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a more affordable replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous alternatives and devices I could however I believe I’m happier that they just sent a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of bonus is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Eg1-light
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the money it’s gon na take to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed but from a consumer standpoint you ‘d most likely be truly thrilled to get this in