today we’re having a look at a motorized sit-stand desk…Flexispot Eg1 Standing Desk… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you do not believe me, have a look at the video below of it running while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this suggested it was going to be durable) and also a little reluctant (because we all understand just how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the streamlined look of this desk. I’m positive any of the many varied surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as close to that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had actually purchased this I ‘d have been on the phone with customer care right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their site too which also feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various choices and devices I might however I think I’m happier that they just sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Eg1 Standing Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the additional money it’s gon na require to enter into a greater end producer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed however from a consumer perspective you ‘d most likely be truly thrilled to get this in