today we’re taking a look at a motorized sit-stand desk…Flexispot Ehd2… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you don’t think me, check out the video listed below of it running while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this implied it was going to be durable) and likewise a little hesitant (because we all know just how much of a difficulty putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the streamlined look of this desk. I’m positive any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had purchased this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best seems like a cheaper imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website also which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous options and accessories I might but I believe I’m happier that they only sent a standard desk because as a standard desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Ehd2
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the extra money it’s gon na require to enter into a higher end producer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a client perspective you ‘d probably be actually excited to get this in