today we’re taking a look at a motorized sit-stand desk…Flexispot Ek2 Test… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not think me, check out the video listed below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much idea.
On top of being functional, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be strong) and likewise a little reluctant (due to the fact that all of us know how much of an obstacle assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as close to that as I might on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had purchased this I ‘d have been on the phone with customer care immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed also my plan for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their site also which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different options and devices I could but I think I’m better that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of extras is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Ek2 Test
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would spend the additional money it’s gon na require to enter into a greater end maker like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it however their credibility is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a client standpoint you ‘d probably be truly excited to get this in