today we’re taking a look at a motorized sit-stand desk…Flexispot Ek2… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not think me, take a look at the video below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this implied it was going to be sturdy) and likewise a little hesitant (since all of us understand how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as often times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually bought this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site also which likewise feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and devices I could however I think I’m better that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of additionals is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Ek2
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a customer viewpoint you ‘d probably be truly delighted to get this in