today we’re having a look at a motorized sit-stand desk…Flexispot Electric Desk… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how strong the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this meant it was going to be sturdy) and likewise a little hesitant (due to the fact that we all know just how much of an obstacle assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with customer service right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function strangely definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a less expensive imitation of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site as well which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous alternatives and devices I could but I think I’m happier that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Electric Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would spend the money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is great big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a consumer standpoint you ‘d most likely be actually excited to get this in