today we’re taking a look at a motorized sit-stand desk…Flexispot En 1… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electric raise/lower function is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this implied it was going to be sturdy) and likewise a little hesitant (due to the fact that we all understand how much of a difficulty assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the streamlined look of this desk. I’m confident any of the many diverse surfaces that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as close to that as I might on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you should know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had purchased this I ‘d have been on the phone with client service instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a cheaper replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various alternatives and accessories I could but I believe I’m happier that they just sent out a basic desk since as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of additionals is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot En 1
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would spend the additional money it’s gon na require to enter a greater end producer like uplift desk or really desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is great big thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a client perspective you ‘d most likely be actually excited to get this in