today we’re having a look at a motorized sit-stand desk…Flexispot Ep4 Vs Ew8… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really simple to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you do not think me, take a look at the video below of it running while there’s a person resting on it.
The electric raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be tough) and also a little hesitant (since we all know how much of a difficulty putting together furnishings can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually acquired this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged also my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their site as well which also feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different options and accessories I could but I think I’m better that they only sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Ep4 Vs Ew8
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the additional money it’s gon na require to enter into a higher end manufacturer like uplift desk or very desk and I have not personally utilized really desk items so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a customer standpoint you ‘d probably be really delighted to get this in