today we’re taking a look at a motorized sit-stand desk…Flexispot Eq 3… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this implied it was going to be durable) and also a little reluctant (since we all understand just how much of a difficulty assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough male if I had purchased this I ‘d have been on the phone with customer service instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site too which also feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering various choices and devices I might but I believe I’m happier that they only sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Eq 3
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a consumer viewpoint you ‘d probably be truly excited to get this in