today we’re taking a look at a motorized sit-stand desk…Flexispot Eq5 Test… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you don’t believe me, check out the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are even more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this indicated it was going to be sturdy) and also a little reluctant (because we all understand just how much of a challenge assembling furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m positive any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as lot of times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you need to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough male if I had bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site also which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering numerous alternatives and devices I might but I believe I’m better that they only sent a basic desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of bonus is the move when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Eq5 Test
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na require to get into a greater end producer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d probably be actually excited to get this in