today we’re taking a look at a motorized sit-stand desk…Flexispot Eq5 Vs Ec5… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being practical, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this suggested it was going to be strong) and likewise a little reluctant (because we all know just how much of a difficulty assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m positive any of the many varied surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had bought this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to have a look at their website too which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering numerous alternatives and accessories I might but I believe I’m happier that they just sent a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of bonus is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Eq5 Vs Ec5
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance but I would invest the money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters got here harmed however from a consumer viewpoint you ‘d most likely be really delighted to get this in