today we’re taking a look at a motorized sit-stand desk…Flexispot Ergochair 2.0… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. If you do not believe me, have a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it likewise looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this suggested it was going to be durable) and likewise a little reluctant (since we all know just how much of an obstacle putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had actually bought this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different alternatives and accessories I might however I think I’m better that they only sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Ergochair 2.0
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters got here harmed but from a consumer perspective you ‘d most likely be truly delighted to get this in