today we’re having a look at a motorized sit-stand desk…Flexispot Ergonomic Office Chair… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very positive.
It’s really simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this implied it was going to be strong) and likewise a little reluctant (since we all know just how much of a difficulty putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various choices and devices I could but I think I’m happier that they only sent a standard desk because as a basic desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Ergonomic Office Chair
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity however I would invest the money it’s gon na require to enter a greater end producer like uplift desk or extremely desk and I have not personally used really desk items so I can’t speak on it however their reputation is very good big thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a consumer perspective you ‘d most likely be really delighted to get this in