today we’re taking a look at a motorized sit-stand desk…Flexispot Ergonomic… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this meant it was going to be sturdy) and also a little reluctant (because we all understand how much of a challenge assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the sleek look of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually acquired this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my prepare for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their website too which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and accessories I might however I think I’m better that they just sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of additionals is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Ergonomic
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a customer viewpoint you ‘d most likely be really thrilled to get this in