today we’re having a look at a motorized sit-stand desk…Flexispot Ew8… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you do not think me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be tough) and also a little reluctant (due to the fact that we all understand just how much of an obstacle assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with customer care instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged too my plan for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site also which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different alternatives and accessories I might however I think I’m happier that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Ew8
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to get into a greater end producer like uplift desk or extremely desk and I have not personally used really desk items so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a consumer perspective you ‘d most likely be truly delighted to get this in