today we’re taking a look at a motorized sit-stand desk…Flexispot F3… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you do not think me, check out the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this indicated it was going to be sturdy) and also a little reluctant (due to the fact that we all understand how much of a challenge assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had purchased this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but less expensive does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site also which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous options and devices I might however I think I’m happier that they just sent out a fundamental desk because as a basic desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of extras is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot F3
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d probably be actually thrilled to get this in