today we’re having a look at a motorized sit-stand desk…Flexispot F3Mb… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be tough) and likewise a little hesitant (since we all understand how much of a challenge putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged also my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a more affordable replica of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their site also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering numerous choices and devices I could but I believe I’m better that they only sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of additionals is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot F3Mb
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance but I would spend the money it’s gon na require to get into a greater end manufacturer like uplift desk or very desk and I have not personally used really desk products so I can’t speak on it however their track record is great big thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d most likely be really delighted to get this in