today we’re having a look at a motorized sit-stand desk…Flexispot F6Ad… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Examine out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this meant it was going to be durable) and also a little reluctant (since we all know how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had purchased this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their site also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering different options and devices I might however I believe I’m better that they just sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the move when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot F6Ad
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and performance but I would spend the money it’s gon na take to enter a greater end maker like uplift desk or extremely desk and I haven’t personally utilized very desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a client viewpoint you ‘d probably be actually thrilled to get this in