today we’re taking a look at a motorized sit-stand desk…Flexispot F7… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not believe me, check out the video listed below of it operating while there’s a person resting on it.
The electric raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this meant it was going to be durable) and also a little reluctant (due to the fact that all of us understand how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the sleek look of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as often times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near to that as I might on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their website too which likewise feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different options and accessories I might however I believe I’m better that they only sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot F7
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the money it’s gon na take to enter into a greater end maker like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a client standpoint you ‘d most likely be truly delighted to get this in