today we’re taking a look at a motorized sit-stand desk…Flexispot Fehler… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it operating while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be strong) and likewise a little reluctant (due to the fact that all of us know just how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m confident any of the many varied surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to understand by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely definitely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their site as well which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and devices I might however I think I’m better that they only sent a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Fehler
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or really desk and I have not personally utilized very desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a customer perspective you ‘d probably be truly delighted to get this in