today we’re having a look at a motorized sit-stand desk…Flexispot Frame Review… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. Examine out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower feature is not just easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are much more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be sturdy) and likewise a little hesitant (due to the fact that all of us understand how much of a challenge assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once put together, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as often times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I might on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had actually purchased this I ‘d have been on the phone with customer support immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering numerous alternatives and accessories I could however I think I’m better that they only sent a basic desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Frame Review
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance but I would invest the additional money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is very good big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged but from a customer standpoint you ‘d most likely be really delighted to get this in