today we’re taking a look at a motorized sit-stand desk…Flexispot Full Sit-stand… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you don’t think me.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be tough) and also a little hesitant (because we all know just how much of an obstacle assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined look of this desk. I’m positive any of the many diverse finishes that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with customer support immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their website also which also feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and devices I might but I believe I’m happier that they only sent a basic desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Full Sit-stand
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance but I would invest the additional money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their track record is excellent big thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters got here damaged however from a customer standpoint you ‘d most likely be actually delighted to get this in