today we’re taking a look at a motorized sit-stand desk…Flexispot Furniture… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower feature is not only easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it likewise looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be tough) and likewise a little hesitant (since all of us understand just how much of a difficulty assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for pass through the outside carton
for the desktop was not damaged in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually acquired this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged too my plan for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a more affordable replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site too which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various alternatives and devices I might however I think I’m happier that they only sent out a standard desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Furniture
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be really delighted to get this in