today we’re having a look at a motorized sit-stand desk…Flexispot Garage Storage Lift… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this meant it was going to be strong) and likewise a little reluctant (because we all understand just how much of an obstacle putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I could on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you need to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually bought this I ‘d have been on the phone with client service instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my prepare for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site also which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different choices and accessories I could but I think I’m better that they just sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Garage Storage Lift
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a consumer standpoint you ‘d probably be actually thrilled to get this in