today we’re having a look at a motorized sit-stand desk…Flexispot Glass Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you don’t think me, have a look at the video below of it running while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this indicated it was going to be sturdy) and also a little reluctant (due to the fact that we all know just how much of a difficulty assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts site with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my plan for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which also feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering various choices and devices I could however I think I’m happier that they only sent a basic desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Glass Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to enter into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a customer standpoint you ‘d probably be really delighted to get this in