today we’re having a look at a motorized sit-stand desk…Flexispot Glassdoor… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Examine out the video listed below of it running while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this suggested it was going to be tough) and likewise a little reluctant (because we all know how much of an obstacle putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near to that as I could on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is entirely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with customer support right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their website also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various options and devices I might however I think I’m happier that they only sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of additionals is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Glassdoor
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and efficiency but I would spend the additional money it’s gon na require to enter a greater end maker like uplift desk or extremely desk and I have not personally used really desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d most likely be really delighted to get this in