today we’re having a look at a motorized sit-stand desk…Flexispot Gmbh Düsseldorf… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this indicated it was going to be tough) and also a little reluctant (because we all understand how much of a difficulty assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I might on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you should know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a more affordable replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their website too which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering different options and devices I could however I think I’m better that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of additionals is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Gmbh Düsseldorf
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the money it’s gon na require to enter into a greater end maker like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it but their reputation is very good big thanks to flexi area for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters got here harmed but from a client standpoint you ‘d probably be really delighted to get this in