today we’re having a look at a motorized sit-stand desk…Flexispot H2B… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this meant it was going to be strong) and also a little hesitant (since we all know how much of an obstacle assembling furnishings can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m confident any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you want throughout the day.
Finally, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I could on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with customer support right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering different options and accessories I could but I think I’m happier that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of bonus is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot H2B
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would invest the money it’s gon na take to enter a higher end producer like uplift desk or really desk and I have not personally utilized extremely desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged however from a customer perspective you ‘d most likely be actually excited to get this in