today we’re taking a look at a motorized sit-stand desk…Flexispot Height Adjustable Desk 42 X 24 Inches… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be sturdy) and also a little hesitant (due to the fact that we all understand how much of an obstacle assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek appearance of this desk. I’m confident any of the many varied finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is utterly unusual because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually acquired this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any sort of cable management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site also which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous alternatives and accessories I could but I believe I’m better that they only sent a fundamental desk because as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Height Adjustable Desk 42 X 24 Inches
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance however I would spend the additional money it’s gon na require to enter into a higher end producer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is great big thanks to flexi area for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d most likely be actually thrilled to get this in