today we’re having a look at a motorized sit-stand desk…Flexispot Height-adjustable Standing Desk Riser For Corner Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you do not think me, check out the video listed below of it running while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be durable) and likewise a little reluctant (because we all know how much of a difficulty assembling furnishings can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I love the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I might on uplifts website with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you ought to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually bought this I ‘d have been on the phone with customer care instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed as well my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site as well which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering numerous choices and accessories I might however I think I’m happier that they only sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of bonus is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Height-adjustable Standing Desk Riser For Corner Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it but their credibility is excellent huge thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed but from a client standpoint you ‘d probably be really excited to get this in