today we’re having a look at a motorized sit-stand desk…Flexispot Height-adjustable… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. If you do not think me, check out the video listed below of it running while there’s a person resting on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be durable) and also a little reluctant (since we all know how much of a challenge putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I might on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you ought to understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable television grommets for go through the outside carton
for the desktop was not harmed in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough male if I had acquired this I ‘d have been on the phone with customer service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering numerous choices and accessories I could however I believe I’m happier that they only sent a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Height-adjustable
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the extra money it’s gon na require to enter into a greater end maker like uplift desk or really desk and I have not personally used extremely desk products so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged however from a consumer standpoint you ‘d probably be really delighted to get this in