today we’re taking a look at a motorized sit-stand desk…Flexispot Ikea Tischplatte… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you don’t believe me, have a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this implied it was going to be tough) and likewise a little reluctant (because all of us understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once put together, I love the sleek look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had actually purchased this I ‘d have been on the phone with customer care right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any type of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their website as well which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different choices and devices I might however I believe I’m better that they just sent a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Ikea Tischplatte
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would spend the additional money it’s gon na take to enter into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it however their track record is great big thanks to flexi area for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d probably be truly thrilled to get this in