today we’re having a look at a motorized sit-stand desk…Flexispot India… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower function is not only easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this indicated it was going to be tough) and also a little reluctant (since we all understand how much of a difficulty assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the streamlined appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near that as I could on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough male if I had actually purchased this I ‘d have been on the phone with customer service instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their website as well which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering different alternatives and accessories I could however I think I’m happier that they just sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot India
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the money it’s gon na take to get into a higher end maker like uplift desk or very desk and I have not personally used extremely desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a customer perspective you ‘d most likely be truly delighted to get this in