today we’re taking a look at a motorized sit-stand desk…Flexispot Kabelmanagement… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. If you do not think me, take a look at the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower feature is not just easy to use and quick, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this meant it was going to be durable) and likewise a little hesitant (because all of us understand how much of a difficulty putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the smooth appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I might on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my plan for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to have a look at their site as well which also feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m happier that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of extras is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Kabelmanagement
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would spend the additional money it’s gon na take to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be really delighted to get this in