today we’re taking a look at a motorized sit-stand desk…Flexispot Kana Bamboo Standing Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not think me.
The electric raise/lower feature is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The convenient cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this implied it was going to be sturdy) and likewise a little reluctant (because all of us know just how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you ought to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually bought this I ‘d have been on the phone with client service instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various options and accessories I might but I believe I’m better that they only sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of bonus is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Kana Bamboo Standing Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and performance but I would spend the additional money it’s gon na take to enter a greater end producer like uplift desk or really desk and I have not personally used extremely desk products so I can’t speak on it but their track record is great big thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a customer standpoint you ‘d most likely be actually delighted to get this in