today we’re taking a look at a motorized sit-stand desk…Flexispot Keypad… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t think me, have a look at the video below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this meant it was going to be sturdy) and likewise a little reluctant (because all of us understand just how much of an obstacle assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as near that as I might on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is absolutely strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had bought this I ‘d have been on the phone with client service instantly they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged as well my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their website as well which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering different choices and devices I could however I believe I’m better that they just sent a basic desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Keypad
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would invest the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here harmed however from a client standpoint you ‘d most likely be actually delighted to get this in