today we’re having a look at a motorized sit-stand desk…Flexispot M2… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. Inspect out the video below of it running while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this meant it was going to be tough) and also a little hesitant (because we all understand just how much of an obstacle putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely strange since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had acquired this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site as well which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various options and accessories I might but I believe I’m happier that they only sent out a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot M2
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a consumer viewpoint you ‘d probably be truly thrilled to get this in