today we’re having a look at a motorized sit-stand desk…Flexispot M2B… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this implied it was going to be durable) and likewise a little reluctant (due to the fact that all of us know how much of an obstacle putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I like the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough man if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged also my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their website too which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various choices and devices I might however I think I’m happier that they just sent out a basic desk since as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of additionals is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot M2B
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance but I would spend the additional money it’s gon na take to get into a greater end producer like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a consumer perspective you ‘d probably be really thrilled to get this in