today we’re having a look at a motorized sit-stand desk…Flexispot M7B… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this meant it was going to be strong) and likewise a little hesitant (due to the fact that all of us know just how much of an obstacle assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I could on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you ought to understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had actually bought this I ‘d have been on the phone with customer support right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a more affordable imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering various choices and devices I might but I think I’m happier that they just sent out a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot M7B
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the additional money it’s gon na require to enter into a higher end producer like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it however their reputation is very good big thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged however from a consumer standpoint you ‘d probably be actually excited to get this in