today we’re having a look at a motorized sit-stand desk…Flexispot Ma8 Review… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Inspect out the video below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this suggested it was going to be tough) and also a little reluctant (due to the fact that we all understand just how much of an obstacle assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near to that as I might on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had bought this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website also which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different options and devices I could however I believe I’m happier that they only sent out a basic desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of bonus is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Ma8 Review
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance but I would spend the money it’s gon na take to get into a greater end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it however their track record is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a client viewpoint you ‘d probably be actually excited to get this in