today we’re taking a look at a motorized sit-stand desk…Flexispot Malaysia… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you don’t believe me, check out the video below of it running while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quickly, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this implied it was going to be tough) and also a little hesitant (since we all understand how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough man if I had acquired this I ‘d have been on the phone with customer care immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website as well which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and accessories I could however I think I’m happier that they just sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Malaysia
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance but I would spend the money it’s gon na require to get into a higher end manufacturer like uplift desk or very desk and I have not personally utilized really desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d probably be really excited to get this in